Projects

Here you will find a list of a few of our projects we have worked on or are working on.


Speech controlled project


For a client developing now a speech controlled project. According to certain commands, multiple actuators can be activated and used. This project is now made as a proof of concept. If all works according to specifications, a custom PCB will be made.


Using the following components:

  • Raspberry Pi 4B
  • 2 steppermotors
  • 1 servo
  • 1 relais card
  • 1 wireless microphone

Custom PCB


Custom hardware to run custom software as a Web3.0 solution for Web2.0 problems.
For more information: https://www.fxtree.link


This is the DevKIT, which represents the end product, but scaled down.

There is a prototype made and even Version 2 is on its’ way. After testing the first batch will be produced and shipped.


The Grid acts as an interconnect for all the Towers interfacing wsith the MainHub.

The Grid is done for 99,9%. Some final small changes might need to be made to fit into the enclosure.


The MainHub acts as a docking station capable Hub, but also as the main controller of all the Tower connections on the Grid.

MainHub design will be started in Week 39. Schematics are mostly done, but because of changes in the PCB setup, it needs to be slightly modified.


The CM4 Tower, capable of working in standalone mode, or attached to the Grid.

Not shown: the base for standalone function.


The complete assembly as of 2022-09-20:


A custom made PCB with logo as a prototype test.


A custom made design for a DAC and Amplifier. 2 prototypes were made and are now being designed as one PCB. Some points of interest were changed and added some nice-to-haves.


Gaming PC


This gaming PC had a budget of around €1500,-. The requirement was High/Ultra on 1440p with 60 FPS. For the CPU we went with a Ryzen 5 3600 and for the GPU a RTX Aorus 2060 Super.


The following PC was assembled a while back. We assisted in making a list of suitable components and sourcing them. To spare some money we were allowed to buy second hand. The parts that were bought second hand were fully tested and validated before used in the build. The big challenge was finding a GTX1080-Ti in mini-itx form factor, as that was a hard requirement.